Highlights
-
PAV – the fully automatic panel lowering device
-
PPS – the fully automatic, programmable panel feeder
-
STRIEBIG ExpertCut 4D
Standard equipment
Comprehensive standard equipment
- 12" touch screen computer with optimum operator guidance
- Laser-supported display of the horizontal cut
- Digital measuring system DMS-X
- Electronic positioning system for horizontal cutting EPS-Y
- Automatic saw beam locking with interface recognition
- Automatic tilting of the saw unit in vertical or horizontal cutting position
- Automatic insertion and removal of the saw unit
- Automatic panel end recognition
- Automatic movement of the riving knife
- Infinitely variable feed speed 10-25 m/min
- Selectable sawing cycle
- Pneumatic clutch for easy changeover to manual operation
- Operating time counter
- Tool database
- ALU centre support over the entire machine length
- ProLock Easy-Fix tool clamping system
- Light curtain monitors the danger zone of the 4D and ensures a high level of safety during operation
- UPS 24VDC for Touch-PC (UPS uninterruptible power supply)
- Integrated, especially powerful TRK dust extraction. Dust limit value around 1 mg/m³
- Super-silent noise insulation
Technical Data
| Weight of the saw | approx. 1.800 kg |
| Cutting depth | 80 mm *1 |
| Saw motor power | 5.5 kW (7.5 HP) |
| Saw blade diameter | 300 mm *2 |
| Saw blade bore | 30 mm *3 |
| Emission sound pressure level at the workplace LpA | 83 dB *4 |
| Saw blade speed | 4800 rpm |
| 1 extraction connection | ø 140 mm |
| Compressed air connection | 6-10 bar |
| Wattage (incl. PAV/PPS) | 9.1 kW |
| Mains connection | 3 x 400 V / 50 Hz |
*1 Option: up to 130 mm · *2 Option: up to 400 mm · *3 with 2 side holes Ø 9 mm, radius 30 mm · *4 Measurement standards and emission values according to EN 1870-14, measurement uncertainty allowance K = 4 dB(A). (All data refers to the Striebig 4D type 6224)
The following applies to all machines:
Efficient TRK dust extraction significantly below 2 mg/m3. The system used must have an extraction performance of 20 m/s in order to meet the TRK specifications. (Vacuum approx. 1400 Pa. / COMPACT approx. 1470 Pa) at the connector in order to meet the TRK specifications.
Technical note
Permissible ambient temperature min: + 5 °C / max. + 40 °C
Relative humidity: 19 - 95% without condensation
In case of mains fluctuations greater than +/- 10% of the nominal voltage, a voltage stabiliser must be installed at the place of use.
The technical specifications are approximate values.
We reserve the right to make changes due to further developments.
Dimension in mm
for cutting depth 80 mm
| Type | L* | H H | T1 free |
T2 Wall |
|---|---|---|---|---|
| 6224 | 7487 | 3126 | 2074 | 1604 |
* L = Total length of the machine, including control cabinet
Cutting range in mm
for cutting depth 80 mm
| Type | LS | HS vertical |
HS horizontal |
|---|---|---|---|
| 6224 | 5300 | 2240 | 2100 |
|
with PAV |
3000 | 2170 | 2100 |
Dimension in mm
for cutting depth 95/130 mm
| Type | L* | H | T1 free |
T2 Wall |
|---|---|---|---|---|
| 6224 | 7647 | 3241 | 2192 | 1868 |
* L = Total length of the machine, including control cabinet
Cutting range in mm
for cutting depth 95/130 mm
| Type | LS | HS vertical |
HS horizontal |
|---|---|---|---|
| 6224 | 5300 | 2240 | 2100 |
| with PAV | 3000 | 2170 | 2100 |