1 1

STRIEBIG CONTROL

STRIEBIG CONTROL

CONTROL – cutting technology meets ergonomics and intelligence

The CONTROL is already well-equipped when it leaves the factory. A 12" touch screen computer and the modern machine software ensure perfect operating comfort in every detail. The automatic saw swivelling is just one of the many functions that make panel cutting ergonomic and comfortable. Intelligent options allow you to achieve a high degree of automation of the sawing process and to integrate CONTROL into the operational data flow.

View full details

Highlights

  • Modern STRIEBIG operating unit (HMI)

    With the logically designed user interface, you can control the CONTROL easily and conveniently via a 12" touch screen.

  • Electronic positioning system EPS-Y and ABO – top trimming

    Thanks to the standard EPS-Y you can automatically position the saw unit for horizontal sawing. The ABO, which is also a standard feature, ensures the automatic top trimming cut.

  • 4SB – lower trimming

    With this option, the lower trimming cuts are performed automatically. The turning of the panel material and the heavy physical work associated with it is no longer necessary.

Standard equipment

Comprehensive standard equipment

  • 12" inch touch screen computer with optimal user guidance
  • Laser-supported display of the horizontal cut
  • Digital measuring system DMS-X
  • Electronic positioning system EPS-Y incl. automatic top trimming cut ABO
  • Automatic saw beam locking with interface recognition
  • Automatic locking and swivelling of the sawing unit
  • Automatic insertion and removal of the sawing unit
  • Automatic panel end recognition
  • Fully automatic sawing sequence
  • Selectable sawing cycle
  • Pneumatic clutch for easy changeover to manual operation
  • Operating time counter
  • Tool database
  • ALU centre support over the entire machine length
  • Integrated, particularly powerful TRK dust extraction. Dust limit value around 1 mg/m³
  • Super-silent noise insulation
  • Network connection
  • UPS 24VDC for Touch-PC (uninterruptible power supply)

Technical Data

Weight of the saw approx. 1.200 kg
Cutting depth 80 mm *1
Saw motor power 5.5 kW (7.5 HP)
Saw blade diameter 300 mm
Saw blade bore 30 mm *2
Emission sound pressure level at the workplace LpA 83 dB *3
Saw blade speed 4800 rpm
1 extraction connection ø 140 mm
Compressed air connection 6-10 bar
Wattage 7.3 kW
Wattage with option 4SB 10.7 kW
Mains connection 3 x 400 V / 50 Hz

 

*1 Option: 103 mm · *2 with 2 side holes Ø 9 mm, radius 30 mm · *3 Measurement standards and emission values according to EN 1870-14, measurement uncertainty allowance K = 4dB (A). (All data refers to CONTROL type 6224)

The following applies to all machines:
Efficient TRK dust extraction system significantly below 2 mg/m3. The system used must have an extraction performance of 20 m/s in order to meet the TRK specifications. (Vacuum approx. 1400 Pa. / COMPACT approx. 1470 Pa) at the connector in order to meet the TRK specifications.

Technical note:
Permissible ambient temperature min: + 5 °C / max. + 40 °C
Relative humidity: 19 - 95% without condensation
In case of mains fluctuations greater than +/- 10% of the nominal voltage, a voltage stabiliser must be installed at the place of use.

The technical specifications are approximate values.
We reserve the right to make changes due to further developments.

Dimensions in mm

Type L* H T1
free		 T2
Wall
6224 7153 3035 1741 1361
6216 7153 2951 1700 1354
6168 7153 2477 1500 1312
5224 6153 3035 1741 1361
5216 6153 2951 1700 1354
5168 6153 2477 1500 1312
4224 5153 3035 1741 1361
4216 5153 2951 1700 1354
4168 5153 2477 1500 1312

* L = Total length of the machine, including control cabinet

Cutting area in mm

Type LS HS
vertical		 HS
horizontal
6224 5300 2240 2100
6216 5300 2160 2016
6168 5300 1680 1540
5224 4300 2240 2100
5216 4300 2160 2016
5168 4300 1680 1540
4224 3300 2240 2100
4216 3300 2160 2016
4168 3300 1680 1540

Media