Standard equipment
Comprehensive standard equipment
- 12" inch touch screen computer with optimum operator guidance
- Laser-supported display of the horizontal cut
- Digital measuring system DMS-XY
- Automatic saw beam locking with interface recognition
- Automatic locking and swivelling of the sawing unit
- Automatic insertion and removal of the sawing unit
- Automatic fine adjustment of the sawing unit
- Operating time counter
- Tool database
- ALU centre support over the entire machine length
- Integrated, powerful TRK dust extraction. Dust limit value around 1 mg/m³
- Control cabinet directly attached to the saw frame
- Super-silent noise insulation
- UPS 24VDC for Touch-PC (uninterruptible power supply)
Technical Data
Weight of the saw | approx. 1.100 kg |
Cutting depth | 80 mm *1 |
Saw motor power | 5.5 kW (7.5 HP) |
Saw blade diameter | 300 mm |
Saw blade bore | 30 mm *2 |
Emission sound pressure level at the workplace LpA | 83 dB *3 |
Saw blade speed | 4800 rpm |
1 extraction connection | ø 140 mm |
Compressed air connection | 6-10 bar |
Wattage | 7.3 kW |
Mains connection | 3 x 400 V / 50 Hz |
*1 Option: 103 mm · *2 with 2 side holes Ø 9 mm, radius 30 mm · *3 Measurement standards and emission values according to EN 1870-14, measurement uncertainty allowance K = 4dB (A). (All data refers to EVOLUTION type 6224)
For all machines the following applies:
Efficient TRK dust extraction significantly below 2 mg/m3. The system used must have an extraction performance of 20 m/s in order to meet the TRK specifications. (Vacuum approx. 1400 Pa. / COMPACT approx. 1470 Pa) at the connector in order to meet the TRK specifications.
Technical note:
Permissible ambient temperature min: + 5 °C / max. + 40 °C
Relative humidity: 19 - 95% without condensation
In case of mains fluctuations greater than +/- 10% of the nominal voltage, a voltage stabiliser must be installed at the place of use.
The technical specifications are approximate values.
We reserve the right to make changes due to further developments.
Dimensions in mm
Type | L* | H | T1 free |
T2 Wall |
---|---|---|---|---|
6224 | 6645 | 3018 | 1741 | 1361 |
6216 | 6645 | 2934 | 1700 | 1354 |
6168 | 6645 | 2460 | 1500 | 1312 |
5224 | 5645 | 3018 | 1741 | 1361 |
5216 | 5645 | 2934 | 1700 | 1354 |
5168 | 5645 | 2460 | 1500 | 1312 |
4224 | 4645 | 3018 | 1741 | 1361 |
4216 | 4645 | 2934 | 1700 | 1354 |
4168 | 4645 | 2460 | 1500 | 1312 |
* L = Total length of the machine, including control cabinet
Cutting area in mm
Type | LS | HS vertical |
HS horizontal |
---|---|---|---|
6224 | 5300 | 2240 | 2100 |
6216 | 5300 | 2160 | 2016 |
6168 | 5300 | 1680 | 1540 |
5224 | 4300 | 2240 | 2100 |
5216 | 4300 | 2160 | 2016 |
5168 | 4300 | 1680 | 1540 |
4224 | 3300 | 2240 | 2100 |
4216 | 3300 | 2160 | 2016 |
4168 | 3300 | 1680 | 1540 |